Specifications
Keyboard: 37-notes full-size keyboard (3 octaves)
Main Controllers: Control Wheel (center click), Momentary switch
Input and Output
Signal In: jack (mono phone jack)
Signal out: jack (mono phone jack, 2Vp-p output, 3.5 k ohm)
PHONES jack (stereo phone jack, 33 ohm, 48mW)
DC12V jack, MINI IN jack, USB connector (type B)
- Amplifier Out,
- Bandpass filter Out,
- CV Out (0 - +8.4V),
- ENV Out (0 - +5V),
- Trig Out (+5V-->GND),
USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
General
Power Supply: DC12V
Dimensions (W x D x H): 573 mm x 316 mm x 248 mm/22.56" x 12.44" x 9.76"
Weight: 6.3 kg/13.89 lbs.
Colour Options: Green, White, Blue, Black
Included Items: AC adapter (12 V/1.5 A), patch cable x 10
Control Section
Voltage Controlled Oscillator 1 (VCO 1):
- Scale (32', 16', 8', 4') (6 octaves, +cent, -cent)
- Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
- Pulse width adjust 1:1 - 1:infinity
Voltage Controlled Oscillator 2 (VCO 2):
- Scale (16', 8', 4', 2') (6 octaves, +cent, -cent)
- Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
- Pitch (± 1 octave)
VCO Master control:
- Master tune (± 100cent)
- Portamento (max. 10sec)
- FFrequency modulation intensity by MG/T.EXT (-5V - +5V)
- Frequency modulation intensity by EG1/EXT (-5V - 0V)
VCO Mixer:
Voltage Controlled High Pass Filter (VCF HPF):
- Cutoff frequency (50Hz - 15,000Hz)
- Peak (flat - self OSC)
- Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
- Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
Voltage Controlled Low Pass Filter (VCF LPF):
- Cutoff frequency (50Hz - 15,000Hz)
- Peak (flat - self OSC)
- Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
- Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
Envelope Generator 1:
- Delay time (10sec)
- Attack time (10sec)
- Release time (10sec)
Envelope Generator 2:
- Hold time (20sec)
- Attack time (10sec)
- Decay time (10sec)
- Sustain level (0V - 5V)
- Release time (10sec)
Modulation Generator (LFO):
- Waveform (Positive Sawtooth - Triangle - Negative Sawtooth, Wide Pulse - Square - Narrow Pulse)
- Frequency (0.1Hz ~ 20Hz)
Manual controller:
- Control wheel (centre click)
- Momentary switch -->GND
Power switch and Volume: Volume
Indicator: LED (KBD trigger, Modulation Generator rate, Power ON)
External Signal Processor
1. Control section:
- Input signal level
- Low cut frequency (50Hz - 2,500Hz)
- High cut frequency (100Hz - 5,000Hz)
- CV adjust
- Threshold level
2. Input and Output:
- Signal In
- Amplifier Out
- Band pass filter Out
- CV Out (0 - +8.4V)
- ENV Out (0 - +5V)
- Trig Out (+5V-->GND)
3. Indicator (LED):
- Peak indicator
- Trigger indicator
Patch Panel
1. Keyboard:
- Keyboard control voltage output (Exponential) (0 - +8V)
- Keyboard trigger output (+5V-->GND)
- VCO-1 + VCO-2 control voltage input (Linear response) (0 - +8V)
- VCO-2 control voltage input (Linear response) (0 - +8V)
2. VCO: VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V - +5V)
3. VCF:
- External signal input (3Vp-p max.)
- External High pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
- External Low pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
4. VCO + VCF: Total external modulation input (T.EXT) (-5V - +5V)
5. VCA: External initial gain control input (0 - +5V)
6. EG:
- EG 1 envelope signal normal output (-5V - 0V)
- EG 1 envelope signal reverse output (+5V - 0V)
- EG 1 + EG 2 trigger input (-->GND)
- EG 1 trigger input (-->GND)
- EG 2 envelope signal reverse output (+5V - 0V)
7. MG:
- Triangle output (Positive Sawtooth - Triangle - Negative Sawtooth) (5Vp-p)
- Rectangle output (Wide Pulse - Square - Narrow Pulse)(0 - +5V)
8. Noise Generator:
- Pink noise output (5Vp-p)
- White noise output (5Vp-p)
9. Sample and Hold:
- Clock trigger input (-->GND)
- Sample signal input (5Vp-p max.)
- S/H output (5Vp-p max.)
10. Modulation VCA:
- Control voltage input (0 - +5V)
- Signal input (-5V - +5V)
- Signal output (-5V - +5V)
11. Manual controller:
- Control wheel output (-5V<--0V-->+5V)
- Momentary switch output (-->GND)
12. Signal out: Signal output (mono 1/8" mini phone jack, 2Vp-p output impedance 3.5k Ω)
13. Headphones: Headphones output (Stereo 1/8" mini phone jack, 33 Ω 48mW)
14. USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
15. MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Others
Power Consumption: 9W